![]() Hang on your wall to start using your key and mail organizer.Lastly, add a drawer pull to the shelf as a place to keep mail organized. Add hooks to the bottom half of the wood round.After a day, tape off the shelf and apply teak oil on the wood round to bring out the natural wood look. Key Almirah, Hand Made, Wall Mount Key Holder, Hand Made 13x11x4inch Wooden Wall Hanging, Decorative Key Box, Key Cabinet, Key Rack, Hanger.Then use your desired color paint to put on a final 2 coats. Apply 3 coats of primer to your shelf.Sand everything with 150-grit sandpaper until smooth. Sand off the excess plugs and glue with 80-grit sandpaper and an orbital sander.Once attached fill the pocket holes with wood glue and pocket hole plugs.Attach the shelf to the round with Kreg pocket hole softwood screws.Follow up with 150-grit sandpaper on the entire shelf. Sand the edges of the shelf so they match up with the edge of the wood round using 80-grit sandpaper and an orbital sander.Drill pocket holes on the bottom of the shelf as shown in the woodworking plans.Cut wood according to the visual cut list in the woodworking plans with a table saw and miter saw.You just clamp it down and it automatically adjusts to match the thickness of your wood, so cool, right? My favorite new feature of 720PRO and 520PRO is the clamp that you don’t have to adjust anymore. The new 720PRO (which we were using for this DIY mail and key rack) and the 520PRO (which replaced the smaller K4 system) were improved a ton, the most noticeable change being that they are easier to set up and use – score. This makes the keys sit level once placed into the key holder because they want to fall with gravity and end. It may be hard to see, but I did have the blade turned about 7 or 8 degrees. This is very cool idea how to make key holder. You can make wall art and put hangers for your keys. Paint vintage frame and put old keys in it as a dcor. In 2021, Kreg released brand new pocket hole systems that replaced the K4 and K5, and the upgrades are pretty awesome. This is a standard 10' table saw blade kerf width, and I found that a key fit perfectly in it. We present you 20 diy key holders that will awake your imagination. ![]() We built tons of projects using our original K5 Pocket Hole Jig, we even have a super detailed guide and video about how to use it that you can check out here. If you’ve been following Making Manzanita for a bit, you know that we are big fans of the Kreg pocket hole system. Alternatively, you could cut your own wood round…but I wanted to make this project very beginner-friendly so it is accessible even if you’re just getting started with woodworking! Kreg 720PRO Pocket Hole Jig ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |